- The DualShock 4 of the Sony PlayStation 4 is one of the fundamental elements for the experience with this console from the Japanese firm, although from time to time they can surprise and worry
- If you notice that your PS4 controller is flashing a white light and you've never done it before, we'll go over some possible solutions to that phenomenon, so you can get it back to normal
Beyond the various DualShock models, most users use the original PS4 controller. With this in mind, it is important to know how to get rid of some of the main malfunctions that these accessories can present. And if you are one of those who believe that he has gone crazy, you know that is not the case, not at all. You just need to know how to fix a flashing white flashing PS4 controller ..
In the end, when your console or its peripherals do things that you have never seen before, it is understandable that you worry . Precisely, in this case, we focus on the DualShock controller light, which can flash white. There are basically two reasons for this: either the battery is running low, or the controller can't connect well.
The good news is that, of course, both problems have their solutions, so let's get to know them..
What to do if the PS4 controller flashes white?
Check your USB cable
USB cables can be fragile, and even more so when gaming thrills take center stage. Many times, when playing, we forget that they are connected and we mistreat them too much .
If we add to this that some USB cables are not original, but copies, their durability may be even lower. You should try your luck with another similar USB cable , if you have it at home, to check if the error comes from there..
Reset your console
The old "turn off and on again" trick works more times than you think, so you should start here. Power off your console by holding down the power button for 10 seconds, removing the power cable from the back of the PS4, waiting a few minutes, and powering it back on .
reset the controller
Although you may not know it, the driver has its own independent software, and when it is updated it may fail. Fortunately, you can reset it to its factory defaults .
You have to use an unfolded paper clip or SIM card opener and press the button inside its hole. Keep pressed for a few seconds, until it restarts , and wait to check the results.
Start in safe mode
Since it's possible that your PS4 is to blame and not the controller, let's look at two alternatives that go that route. First, by starting it in safe mode, to prevent potential firmware issues from affecting it .
By starting it in safe mode, test if your PS4 controller works as it should… or read on.
Turn off your PS4
One last solution, at least for now, is to turn off the PS4 console, and then restart it, of course .
You have to hold down the power button until you hear two beeps, the second at seven seconds. Next, connect the DualShock controller via USB cable, and press the PS button to activate it .
And what happens if I use a DualShock 4 on PS5?
Just as you can use a PS5 controller on a PS4, you can use a DualShock 4 controller on PS5 too. Sony has made sure that DualShock 4 controllers are compatible with PS5 .
The easiest way is to connect your peripheral via USB charging cable, then it will work smoothly. Of course, remember that it will only be compatible with games designed for PS4 , not those for PlayStation 5.
If none of the above steps work, unfortunately your controller may have a problem. Above all, these things happen when one is not very careful in its use, and has suffered some blows or falls. That being your case, try to buy another one and be more cautious in the future when you use it .
