One of the main utilities of mobile phones today is that they can connect to the network . Thanks to the amount of WiFi networks that we can find almost anywhere, the ease of these connections is really wide. In addition to this means, we can connect to the internet from our phone through the data connection. We can do this thanks to the possibility of incorporating a SIM card with data rate in the terminal..
With this SIM we will have our own telephone number to be able to receive calls whenever we need or make them. In addition, different Apps such as WhatsApp, for example, require a mobile number to be used. It is important to have a SIM in our mobile phone because in this way we can contract with a carrier a fee to be able to communicate at any time regardless of the fact of being able to connect to the WiFi network or not.
Depending on the model, the way to put the SIM card may vary. That is why we show you below how to put it in the Huawei P smart + Plus so that it is set correctly..
To keep up, remember to subscribe to our YouTube channel! SUBSCRIBE
Step 1
The first thing you should do is have at hand the 3 elements you need to place the SIM in the terminal:
Note
It is recommended that the terminal be turned off for safety when performing this process.
Step 2
Now you must insert the thin part of the key into the hole located on the left side of the terminal.
Step 3
When entering the end of the key you will have to make a small pressure. You will see that the tray stands out and you can remove it to collect the SIM.
Step 4
Now you will see two spaces available. You must place the Nano SIM in the smallest place in the correct way as you can see in the photo, so that it is completely fitted.
Step 5
When it is placed in the correct way, you have to reinsert the SIM tray into the hole on the left side of the mobile. It is important that we make sure that the tray is placed correctly.
Once you have done this, you can turn on the phone again and start making calls and sending messages with your own mobile number.