The USB debugging system is a procedure by which information is sent from the mobile device to the computer . This should be done frequently due to the large amount of content and data and even multimedia content that is stored on the computer throughout its useful life and that may need to be managed from a larger device such as the PC. ..
This is done with the purpose not only of protecting the information that is in the mobile , but also to free the memory and with this improve the performance of the equipment and of course increase the storage capacity. To carry out the transfer of data, the most common is to do it with a cable, but if we want to do it in this way, USB debugging must have been activated previously; since not doing so would be considered impossible to comply with the procedure of transmitting content from the device to the computer.
It is for this reason that below in TechnoWikis you can watch a video and a tutorial where you are shown the correct way to activate the USB debugging in the Huawei P30 Pro Android phone ..
For this you have to follow the steps that you will see below:
To stay up to date, remember to subscribe to our YouTube channel! SUBSCRIBE
1. How to activate Huawei P30 Pro USB developer and debug mode
To start it is necessary to activate the developer mode, by doing so we have direct access to the debug mode. For this you have to do the following:
Step 1
In the main menu of the phone there is the alternative "Settings", we must select it.
Step 2
A list with different sections will now be displayed, where you must press "System".
Step 3
Afterwards, a new window will open where we should choose the "About phone" alternative.
Step 4
Next, the option "Compilation number" will be shown, it will be necessary to press 7 times consecutively in such a way that the developer mode is enabled.
Step 5
Then, re-enter the option "Settings" to go later to the "Systems" section where you must press.
Step 6
After activating the developer mode you can see that the new option "Developer options" appears, which we must select to continue.
Step 7
Next, you will see the alternative "USB Debugging", which is necessary to activate. For this you have to move to the right the tab that is next to it. Likewise in the window an informative message will be shown, in which it is indicated that the USB debugging allows the exchange of data between the computer and the mobile. It is necessary to press the "Accept" option that is located at the end of the phone screen and with which it is possible to grant the USB debug permission to the system.
2. How to disable Huawei P30 Pro developer mode
In order to be able to deactivate the developer mode in the mobile device, the following procedure must be carried out.
Step 1
We must enter the "Settings" section.
Step 2
It will open immediately a directory with a list of options where we must click on "System."
Step 3
After completing the previous step, a pop-up window will be displayed where you can see several options, click on "Developer options".
Step 4
Next to the previous alternative, there is a blue tab, which we must move to the left in order to deactivate the developer mode. Once this is done, the button will change to gray
Like the vast majority of tutorials offered by TechnoWikis, in this procedure you can also revert the process, just move the tab to the right and you're done.