+4 votes
512 views
Connect two PC computers with Windows 10 network cable

in VPN and Routing by (552k points)
reopened | 512 views

1 Answer

+5 votes
Best answer

1. Connect PCs with network cable in Windows 10
2. Transfer files between PCs with network cable in Windows 10

The transfer of files will always be one of the main tasks to be carried out by administrators, support staff and traditional users of the system since in many cases it is required to pass information between computers either locally or remotely . Although there are several ways to achieve this, one of the simplest , safest and most practical is joining two computers in the local network through Ethernet , which allows us to have a stable and reliable connection . Although it is a practical method we must know for sure some basic aspects so that communication between the two is ideal..

TechnoWikis will explain how to connect 2 computers with Windows 10 using an Ethernet network cable.

Type of cable
Before identifying the type of cable to be used, it will be necessary to determine which devices are to be connected. We can connect two different computers or devices such as a PC to a network switch or an Ethernet adapter and in this case change the type of cable to use to optimize communication. When we use a connection between computers to devices such as switch, hub or routers we will use direct cable where the same type of standard will be used at both ends.

In case of using two similar systems for tasks such as file sharing, where one is responsible for generating the data and the other receives it, the ideal type of cable is cross-wiring which connects the transmission signals at one end with the signals of Welcome to the other end. The crossover cable is used to connect devices directly, this is the case of computers, hub or siwtch, In this case the configured character is different at the ends, that is, different standard. Since we are going to connect two computers with Windows 10, we will use this type of cable for the connection ..

image


1. Connect PCs with network cable in Windows 10

Step 1

To start this process we will go to the next route.
  • Control Panel
  • Network and Internet
  • Center network and sharing
image
Step 2

There we click on the "Change adapter settings" option and in the window we will right click on the Ethernet network adapter and select the "Properties" option: image
Step 3

In the pop-up window we go to the "Network functions" tab and select the line "Internet Protocol version 4 (TCP / IPv4)":

image

Step 4

We click on the "Properties" button and in the following window we define the following:
  • IP Address: 192.168.0.1
  • Subnet mask. 255.255.255.0

image

Step 5

In the second device we access the same adapter option and there we define the following:
  • IP Address: 192.168.0.2
  • Subnet mask. 255.255.255.0

image

Step 6

Click on OK to save the changes. We must keep in mind that the IP addresses of both computers must be different, otherwise a conflict will be created. Once this is done, we will connect the crossover cable to the network ports of the two computers, both ends of the network cable have the same appearance on a physical level like this:

image

Step 7

This port is on the back of the desktops and on the side of some portable computers. Now, we go to the main team and go to the next route.
  • Control Panel
  • Security system
  • System
Step 8

There we must look at the work group in which the team is located, as a rule it is the WORKGROUP group: image
Step 9

The next step is to go to the unit that we have to share, right click on it and select "Properties": image
Step 10

In the displayed window we will go to the “Share” tab and there we click on the “advanced sharing” button:

image

Step 11

In the new window we activate the “Share this folder” box and if we wish we can define the maximum number of connections simultaneously. Click on the Apply and Accept button to save the changes.

image


2. Transfer files between PCs with network cable in Windows 10

Step 1

Now we will go to the team where the unit has been shared, we will right click on the desired item and select the option “Grant access to / Specific users”: image
Step 2

In the displayed window, click on the user field, select "All":

image

Step 3

Click on the "Add" button and then we can define the type of permissions to grant:

image

Step 4

Click on the "Share" button to complete the process.

image

Step 5

Now, from the other computer, it will be possible to access the unit we have shared and perform all the necessary transfer tasks. image

With this simple method, we manage to share in a secure and agile way, all kinds of elements between two Windows 10 computers.


by (3.5m points)
edited

Related questions

+5 votes
1 answer
+5 votes
1 answer
+5 votes
1 answer
+5 votes
1 answer
+5 votes
1 answer
asked May 26, 2020 in Help by backtothefuture (552k points) | 337 views
Sponsored articles cost $40 per post. You can contact us via Feedback

Most popular questions within the last 30 days

10,659 questions
10,791 answers
510 comments
3 users